For decades there seemed to be one trustworthy method to store data on a computer – by using a hard drive (HDD). On the other hand, this sort of technology is by now expressing it’s age – hard disk drives are noisy and slow; they can be power–ravenous and have a tendency to create lots of heat for the duration of intense procedures.

SSD drives, alternatively, are extremely fast, take in a lot less power and they are much cooler. They feature a brand new approach to file accessibility and storage and are years in front of HDDs with regards to file read/write speed, I/O operation and then energy efficiency. See how HDDs stand up up against the newer SSD drives.

1. Access Time

Image

Due to a radical new way of disk drive general performance, SSD drives allow for much faster file access rates. Having an SSD, file accessibility instances are much lower (as low as 0.1 millisecond).

Image

The concept behind HDD drives dates back to 1954. And although it’s been significantly refined over the years, it’s nevertheless can’t stand up to the ingenious ideas driving SSD drives. Through today’s HDD drives, the top file access rate it is possible to reach differs somewhere between 5 and 8 milliseconds.

2. Random I/O Performance

Image

Because of the brand–new revolutionary data file storage technique embraced by SSDs, they have a lot quicker file access rates and quicker random I/O performance.

For the duration of our tests, all SSDs confirmed their capability to manage at the very least 6000 IO’s per second.

Image

With a HDD drive, the I/O performance progressively enhances the more you employ the disk drive. Nonetheless, right after it actually reaches a particular limitation, it can’t go swifter. And due to the now–old technology, that I/O restriction is significantly lower than what you could find with a SSD.

HDD are only able to go as much as 400 IO’s per second.

3. Reliability

Image

SSD drives are designed to include as less rotating elements as is feasible. They use a comparable concept like the one used in flash drives and are generally significantly more reliable compared to regular HDD drives.

SSDs provide an normal failure rate of 0.5%.

Image

HDD drives use rotating disks for storing and reading data – a concept since the 1950s. And with disks magnetically hanging in the air, rotating at 7200 rpm, the likelihood of anything going wrong are generally increased.

The average rate of failure of HDD drives can vary among 2% and 5%.

4. Energy Conservation

Image

SSD drives are considerably smaller compared to HDD drives and they lack any kind of moving elements whatsoever. Because of this they don’t produce so much heat and require less electricity to operate and much less energy for cooling down purposes.

SSDs take in between 2 and 5 watts.

Image

From the second they were constructed, HDDs have always been quite power–hungry equipment. So when you’ve got a hosting server with numerous HDD drives, this will likely boost the monthly utility bill.

On average, HDDs use up between 6 and 15 watts.

5. CPU Power

Image

SSD drives permit speedier data file accessibility speeds, which will, subsequently, permit the CPU to finish data file queries considerably quicker and then to return to additional duties.

The normal I/O wait for SSD drives is only 1%.

Image

Compared with SSDs, HDDs allow for reduced data file accessibility speeds. The CPU will need to wait around for the HDD to send back the required data file, scheduling its allocations while waiting.

The regular I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

In the real world, SSDs perform as admirably as they did throughout the tests. We competed an entire platform back up using one of our own production machines. Over the backup procedure, the standard service time for any I/O demands was in fact below 20 ms.

Image

Using the same server, however this time loaded with HDDs, the effects were very different. The common service time for an I/O call fluctuated in between 400 and 500 ms.

7. Backup Rates

Image

A different real–life improvement is the speed at which the back up is produced. With SSDs, a server back up now takes under 6 hours by making use of YoYo Daddy O’s server–optimized software.

Image

Throughout the years, we have got employed predominantly HDD drives on our machines and we’re well aware of their performance. With a server built with HDD drives, an entire hosting server back up will take about 20 to 24 hours.

The Linux VPS hosting plus the routine Linux shared web hosting accounts offer SSD drives by default. Join our YoYo Daddy O family, to see how we could help you transform your website.

  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is configured for you cost free. 99.9% network uptime. Full root server access rights.

  • Compare our prices

  •  
  • Examine the tools and features coming with YoYo Daddy O’s Virtual Private Servers. You could start off with a cheaper VPS Hosting package and upgrade with just a mouse click as your requirements increase.
  • Compare our hosting plans

  • Contact Us

  •  
  • Our representatives are on duty for you 24 hours a day to answer any queries with regards to our VPS Hosting services. 1–hour response time frame warranty.